|
|  |
| Notices |
Welcome to the sSnakeSs community. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
|
05-28-16, 01:42 AM
|
#1
|
|
Member
Join Date: Sep-2014
Posts: 1,252
Country:
|
Re: Lookin for some learnin.
They don't need high humidity like rainbows, 60% is plenty. I use cypress mulch for substrate and pegboard for tank lids. I use foam board (peel off the paper on both sides) to cover part of the screen or pegboard tank tops to help maintain humidity in my aquarium setups. They do like to soak in the water bowls when they're getting close to shedding. Ceramic caves (actually medium and large cichlid stones) sitting on a tray of sphagnum moss for humid hides works well for the younger ones, the adults don't seem to worry about it as much. I don't cover their tops, the cypress seems to work fine for them. I've seen babies going for $200-250, but they'll come down in price as time goes on and they're bred in larger numbers. A few years ago I was breeding super red bristlenose pleco's, and breeding size adults were selling for $100 each, babies were around $20 each. Now they've become relatively easy to find, and the going price is much lower, sort of like ball pythons, lol.
For low humidity requirements a bull or gopher snake is tough to beat, though my thayeri kings seem to do just fine w/out humid hides or cypress mulch. My little bull snake is growing like a weed in a garden, eats like a python but has a faster metabolism, lol. I keep them and the Tangerine Hondo on aspen with ambient humidity around 30-40% and they all shed cleanly. If you use clear plastic tubs you can drill ventilation holes in the sides rather than the top to help maintain humidity too. My Jap rat snakes are in large Sterilite tubs, and though not quite a display setup they're still clearly visible. Much easier to move around for cleaning and such as well.
Carpet pythons are relatively inexpensive and pretty hardy as well, but they do grow to a fair size and like it warmer than the colubrids. My jungle/cross is about 1.5 years old, just shed today, and the shed is about 6' long. I'm sure it stretched a bit though. The smaller IJ also shed today, she's a year younger and much smaller, not even half that size. I paid around $75 each for them at reptile shows. Just a couple of random hatchlings (like normal BP's or BCI's) but they're great pets.
__________________
7.6.26 Dominican red mountain boas, 1.1 carpet pythons, 3 ATB, 1.1 climacophora, 1.1 Russian rats, 1.1 prasina, 1.1 speckled kings, 3.3.1 corns, 1.1.1 black rats, 1.1 savu, 1.1 Stimson's, 1 spotted python, 1.1 Boiga nigriceps, 3 Olive house snakes, 1 Sonoran mountain king, 0.1 Sinoloan milk snake, 1.1 Dione rat snake.
Last edited by toddnbecka; 05-28-16 at 02:00 AM..
|
|
|
05-28-16, 03:14 AM
|
#2
|
|
Member
Join Date: Feb-2016
Posts: 13
Country:
|
Re: Lookin for some learnin.
Love that little tricolor! Those are one of my all time favorite colubrids!
Anyway, if you are looking to branch out, DRMBs are indeed awesome. The other one that should be on your list is the candoia genus (commonly called Solomon Island or Isabel Island ground boas). They are very docile, max out at around 6 feet, and come in a wide variety of colors. Just make sure you get one that is CBB. The wild caught ones are finicky eaters from what I have seen, but not so with ones that have been raised to eat rodents.
|
|
|
05-28-16, 08:26 AM
|
#3
|
|
Member
Join Date: May-2016
Location: Edmonton
Age: 47
Posts: 86
Country:
|
Re: Lookin for some learnin.
Quote:
Originally Posted by toddnbecka
They don't need high humidity like rainbows, 60% is plenty. I use cypress mulch for substrate and pegboard for tank lids. I use foam board (peel off the paper on both sides) to cover part of the screen or pegboard tank tops to help maintain humidity in my aquarium setups. They do like to soak in the water bowls when they're getting close to shedding. Ceramic caves (actually medium and large cichlid stones) sitting on a tray of sphagnum moss for humid hides works well for the younger ones, the adults don't seem to worry about it as much. I don't cover their tops, the cypress seems to work fine for them. I've seen babies going for $200-250, but they'll come down in price as time goes on and they're bred in larger numbers. A few years ago I was breeding super red bristlenose pleco's, and breeding size adults were selling for $100 each, babies were around $20 each. Now they've become relatively easy to find, and the going price is much lower, sort of like ball pythons, lol.
For low humidity requirements a bull or gopher snake is tough to beat, though my thayeri kings seem to do just fine w/out humid hides or cypress mulch. My little bull snake is growing like a weed in a garden, eats like a python but has a faster metabolism, lol. I keep them and the Tangerine Hondo on aspen with ambient humidity around 30-40% and they all shed cleanly. If you use clear plastic tubs you can drill ventilation holes in the sides rather than the top to help maintain humidity too. My Jap rat snakes are in large Sterilite tubs, and though not quite a display setup they're still clearly visible. Much easier to move around for cleaning and such as well.
Carpet pythons are relatively inexpensive and pretty hardy as well, but they do grow to a fair size and like it warmer than the colubrids. My jungle/cross is about 1.5 years old, just shed today, and the shed is about 6' long. I'm sure it stretched a bit though. The smaller IJ also shed today, she's a year younger and much smaller, not even half that size. I paid around $75 each for them at reptile shows. Just a couple of random hatchlings (like normal BP's or BCI's) but they're great pets.
|
You make it sound easy! 60% humidity is still a bit hard to maintain in the winter, but I'm going to try some of the tips you guys are giving me here and see how I do. $250 is not so bad, I thought I saw some prices like $800... factor in shipping and there's no way. I'll keep my eyes open for these guys, they look like the perfect size! If I can get a bead on someone who breeds them in Canada, they might be in my future. Thank you so much for the information about these guys, there isn't much out there.
Quote:
Originally Posted by kovacs01
Love that little tricolor! Those are one of my all time favorite colubrids!
Anyway, if you are looking to branch out, DRMBs are indeed awesome. The other one that should be on your list is the candoia genus (commonly called Solomon Island or Isabel Island ground boas). They are very docile, max out at around 6 feet, and come in a wide variety of colors. Just make sure you get one that is CBB. The wild caught ones are finicky eaters from what I have seen, but not so with ones that have been raised to eat rodents.
|
Thank you, he's so freaking cute. I wasn't really into the tri's until I held one in person and then I couldn't live without one. They're pretty rare around here, but there are two or three breeders with them now, and they seem to have multiple clutches per year, so I think there will be a lot more of them around soon. I just wish I saw him more.
I have looked at candoia, and I liked the ground boas, but the ones around here are TINY! Nowhere near 6 feet. I still have my eyes on them they are so cool looking, but I really do want something a little bit more substantial.
These are the size of their mature adult females of the only breeders who have them that I've found in Canada. The boys are even smaller.
mature girl.jpg
__________________
Corn snakes: Ripley, Relic, Raven, Meridian, Solace.
African house snake: Eve. California king snake: Cipher. Tricolored hognose: Mercury.
“Don’t ask what the world needs. Ask what makes you come alive, and go do it. Because what the world needs is people who have come alive.” ~ Howard Thurman
|
|
|
| Thread Tools |
|
|
| Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:56 PM.
Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.

Copyright © 2002-2026, Hobby Solutions.
|
 |