border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 08-25-15, 11:14 AM   #1
reptiledude987
Member
 
reptiledude987's Avatar
 
Join Date: Nov-2014
Location: Kitchener Ont
Posts: 1,508
Country:
Re: Is there a rule for this?

Its going to be about how you are fastening the seams as to weather or not a frame will be needed. At any size a frame would never be a bad thing. To put it in perspective; I built a 6'wide 30"deep 4' high enclosure out of 5/8" ply with no frame. It was rock solid! On the seams I put a bead of pl construction adhesive then used a brad nailed and put nails every 2-3" the whole way around.
__________________
1.1 Bredli Sarlacc/Rancor 0.1 Jungle carpet Shelia 0.1 hypo tangerine hondo amidala 0.1 ij carpet greedo 0.1 jag ij carpet maxine rebo 0.1 red western hognose gammorean 1.0 red tail boa boss nass 1.0 mbk Lando 1.0 asian vine higgins 0.1 asian vine wedge 1.0 cape file snake qui-gon jinn 0.1 checkered garter Doikk Na'ts 1.0 eastern garter Figrin D'an
reptiledude987 is offline  
Login to remove ads
Old 08-25-15, 11:52 AM   #2
eminart
Member
 
eminart's Avatar
 
Join Date: May-2014
Location: Huntsville, AL
Posts: 1,042
Country:
Re: Is there a rule for this?

Quote:
Originally Posted by reptiledude987 View Post
Its going to be about how you are fastening the seams as to weather or not a frame will be needed.

This.


I just built a 6'x2' that incorporates a stand/cabinet. I used 3/4" maple ply and glued and screwed all the seams. The only place I used a frame was in the lower area to support the floor. Mine has a few hundred pounds of soil in it though. It all depends on your plans for it, and how you want to build it and make it look.
__________________
“...the old ones ... knew in their bones... that death exists, that all life kills to eat, that all lives end, that energy goes on. They knew that humans are participants, not spectators.” -- Stephen Bodio, On the Edge of the Wild
eminart is offline  
Old 08-25-15, 02:24 PM   #3
jarich
Member
 
jarich's Avatar
 
Join Date: Oct-2011
Posts: 2,237
Country:
Re: Is there a rule for this?

Im sure its solid when you first build it, lets see how that holds up over the years. Plywood is simply glued wood dust and compressed fibre with a thin veneer over it. It has nothing to hold the screws/nails in place if you ever move it or it swells or any other thing that might happen over time (especially when you add moisture and such). Its why your IKEA furniture falls apart after you move the first time. Simply adding a bit of solid wood framing means you dont have to worry about all that. It also allows you to square things much easier without the holes like you see in that example above.
__________________
The plural of anecdote is not data
jarich is offline  
Old 08-25-15, 06:26 PM   #4
Tiny Boidae
Member
 
Join Date: Aug-2015
Location: Louisville
Posts: 527
Country:
Re: Is there a rule for this?

Jim Smith-

Wow thank you so much for that! I think I'm going to go ahead with the wood frame just to be on the safe side, and space the 2x4's at a two foot interval. Does that sound about right?



That's what I have planned for the 8' back wall so far. The same will be repeated on the sides although I'm not sure if the front needs as much bracing due to the door being there?

The tunnel is meant to run parallel to the walls, I just am a bad artist. But you're right about everything else. I wanted to mimic an animal burrow that they'd hide in, so I'll probably have several more entrances and exits in there as well as a hay bedding for it to dig in (the rest of the cage will be a top soil/sand mixture). I was thinking of having little hinged door openings on the outside actually, as this is going to be resting right along the wall (it's actually going to be drilled into it). I also was going to make the rock wall into sections that I can drill into place (in case there's some unforeseeable incident where I'd need to take it apart), and the tunnel would serve a second purpose as a basking ledge/possible support of the wall (it's going to have to protrude outwards because of the tunnel, the wall is). I understand that it's generally a good idea not to get it this complex, but I have a really nice design in my head and spelling it out, I'm realizing a lot of flaws that I wouldn't have come across until I got to that bridge.

So measure twice, cut once? I'm not assembling it until around December if there aren't any bumps in the road, but I'm starting to buy the supplies now so that I can stretch out my spendings. It'd be a bad idea for me to do this all at once on minimum wage, seeing as my girls are pretty costly, but I'm getting there slowly. But when I do finally come around to assembling it, you'll definitely hear about it. Thanks so much.


Jarich-

Yup, I decided to build the frame. I didn't know that about plywood though, it wasn't really something I thought about. Thanks for your help, as that's something that I'll definitely be wary of. I'll go ahead and buy the framing before I get the lumber, see if I can get at least a model to work with within a reasonable amount of time.
Tiny Boidae is offline  
Old 08-25-15, 08:42 PM   #5
eminart
Member
 
eminart's Avatar
 
Join Date: May-2014
Location: Huntsville, AL
Posts: 1,042
Country:
Re: Is there a rule for this?

Quote:
Originally Posted by jarich View Post
Im sure its solid when you first build it, lets see how that holds up over the years. Plywood is simply glued wood dust and compressed fibre with a thin veneer over it. It has nothing to hold the screws/nails in place if you ever move it or it swells or any other thing that might happen over time (especially when you add moisture and such). Its why your IKEA furniture falls apart after you move the first time. Simply adding a bit of solid wood framing means you dont have to worry about all that. It also allows you to square things much easier without the holes like you see in that example above.
Done correctly, plywood can be very sturdy without a frame. It all depends on the design. And the furniture from ikea is particle board, not plywood. Plywood is not wood dust glued together. It is solid, 8'x4' sheets, shaved off of logs, that are stacked to the desired thickness, and glued with the grain being perpendicular. And it is very strong.
__________________
“...the old ones ... knew in their bones... that death exists, that all life kills to eat, that all lives end, that energy goes on. They knew that humans are participants, not spectators.” -- Stephen Bodio, On the Edge of the Wild

Last edited by eminart; 08-25-15 at 08:51 PM..
eminart is offline  
Login to remove ads
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:57 PM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right