border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Community Forums > General Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 02-12-14, 11:05 AM   #1
Pirarucu
Member
 
Pirarucu's Avatar
 
Join Date: Apr-2012
Posts: 2,054
Country:
Re: Is this enclosure to small?

Where did I say keep it in pine?
Please elaborate on why heat lamps are terrible by dint of being lamps? Radiant heat is certainly a much more accurate simulation of nature.
I do not at all mean to cut a large screen area on the top of the cage. I am saying large enough to fit the lamps and no bigger. I also gave a recommendation to counter the loss of humidity. I am fully aware of what happens with screen tops and heat lamps, but that does not mean they are 100% terrible all the time. It is fully possible to use heat lamps and still achieve a suitable humidity level.

Edit: You seem to be assuming that its current cage is pine. It is OSB, so it may or may not be made of pine. The thing is, that doesn't matter at this point. The Phenols contained in pine are no longer dangerous, as the wood has been kiln dried before being used to make OSB.

Last edited by Pirarucu; 02-12-14 at 11:20 AM..
Pirarucu is offline  
Login to remove ads
Old 02-12-14, 11:42 AM   #2
Terranaut
Morelia Enjoyus Maximus
 
Terranaut's Avatar
 
Join Date: Oct-2011
Location: Kitchener
Age: 55
Posts: 4,615
Country:
Re: Is this enclosure to small?

Quote:
Originally Posted by Pirarucu View Post
Where did I say keep it in pine?
Please elaborate on why heat lamps are terrible by dint of being lamps? Radiant heat is certainly a much more accurate simulation of nature.
I do not at all mean to cut a large screen area on the top of the cage. I am saying large enough to fit the lamps and no bigger. I also gave a recommendation to counter the loss of humidity. I am fully aware of what happens with screen tops and heat lamps, but that does not mean they are 100% terrible all the time. It is fully possible to use heat lamps and still achieve a suitable humidity level.

Edit: You seem to be assuming that its current cage is pine. It is OSB, so it may or may not be made of pine. The thing is, that doesn't matter at this point. The Phenols contained in pine are no longer dangerous, as the wood has been kiln dried before being used to make OSB.
Seriously? You said to keep it in the current enclosure. Osb is kiln dried after it is put together and not all of the phenols are gone. Thats why most osb has a slight to moderate pine scent. They also use zinc borate in most osb to control boring insects.
Radiant heat is not an issue but bulky heat lamps and the holes needed to install them cause huge losses in humidity. As the heat source in right in the center of the convection currents.

Back to my question. How much can the OP spend right now to resolve these issues?
__________________
0.1 BCI 1.1.2 Jungle Carpet Pythons 1.0 Jungle Jag 1.0 Goins King Snake 0.1 Leopard Gecko 0.1 Albino Gopher Snake 1.0 Pastel Ball Python
Terranaut is offline  
Old 02-12-14, 05:42 PM   #3
Pirarucu
Member
 
Pirarucu's Avatar
 
Join Date: Apr-2012
Posts: 2,054
Country:
Re: Is this enclosure to small?

Quote:
Originally Posted by Terranaut View Post
Seriously? You said to keep it in the current enclosure. Osb is kiln dried after it is put together and not all of the phenols are gone. Thats why most osb has a slight to moderate pine scent. They also use zinc borate in most osb to control boring insects.
Radiant heat is not an issue but bulky heat lamps and the holes needed to install them cause huge losses in humidity. As the heat source in right in the center of the convection currents.

Back to my question. How much can the OP spend right now to resolve these issues?
It is kiln dried before and after it is put together, if I remember right. Zinc borate is in OSB, but is only irritating when the dust is inhaled in large doses. Not something that is going to happen with a cage of OSB. How bulky are you imagining heat lamps to be? You could use a 6" diameter hole if you don't put a massive dome on the bulb, so at most you would have an 18x6" hole on top of an 8 by 4 foot cage. That is a bit over 2% of the surface area on top of that cage. Having cypress or soil substrate will easily replenish humidity as it is lost, the only difference is that the substrate would have to be sprayed slightly more often. Do that, and you will achieve the same humidity.
I am in no way saying that such a solution is a good long term fix. I am saying it is workable until a suitable cage can be finished. Nor am I advising using OSB for the next cage. I am however not advising to build another temporary cage because the one he has could potentially be harmful in the long run, and to instead spend his time and money on the final cage. I would rather see the OP focus more on getting the final cage finished and moving the burm in than see him waste time and money on a temporary enclosure to prevent it from losing humidity a little bit faster than it would otherwise.

In other words, OP, please spend the bulk of your time and money finishing a cage that will be suitable rather than trying to fine tune or even replace this temporary cage. Especially if money is tight.
Pirarucu is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:55 AM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right