thanks for the reply, no its not a glass tank, i dont use those for reptiles, its a wooden enclosure fully sealed with glass sliding doors, humidity is kept high, as i know this is a major issue for monitors, and i do understand the need for a good tempreture gradient. I have another similar enclosure that is 4x3x2, so i'll use that instead when the time comes, i know the current setup is a very small tank for a monitor, it wont be for long while I work on the design for its final enclosure.
thanks for the info, I've now changed the heating light (which was not directional) to a ceramic heater, and moved the basking area a little closer to the heater which is now providing a 56C spot with a spread of about 48C near by, changing the bulb to cermaic has also had the effect of bringing down the lower end to 24C
I have also added a significant amount of soil-sand mix (3 inches across the base, with a bank of upto 6 inches on one side, compacted down and moist so it will hold up to digging holes) to help keep the humidity up and for it to dig, the area it likes to sleep has so far kept at a constant 90-100% any way
my reason for posting here is because I am currently trying to decide the best approach to building its final home, I've layed out my basic plans in the initial post, and any feedback would be gratefully appreciated

that said, i suspect that many of the designs I've come accross on this thread will heavily influence my final design
if he's likley to reach 60cm at 6months then I may well begin building his final home now and skip the intermediate stage, so I think I need to rethink my current ideas and make the setup a little more portable!
pics will follow at some point soon!