border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Community Forums > General Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 12-10-12, 07:56 PM   #1
Ridge Runner_20
Member
 
Ridge Runner_20's Avatar
 
Join Date: Dec-2011
Location: Elk Grove, CA
Age: 60
Posts: 150
Country:
Re: Mites

Look for 0.5% permethrin. It's the same active ingredient and concentration found in Provent-A-Mite. However, be careful to NEVER, EVER spray it directly on your snake!

From a local and respected breeder: Remove everything from the cage, bedding included, and fog the enclosure with a light mist of your chosen 0.5% permethrin product (Provent-A-Mite, Nix, RID, Equate, etc.). Allow product to dissipate for a few hours, then put fresh bedding and bleached/baked hides, branches, etc. back into enclosure along with snake. It is also recommended to wait another 4-6 hours before introducing a water source.

Hope this helps. Good luck getting rid of the little buggers.

RR_20 (Mike)
__________________
0.1 Hog Island boa, 0.1 Bolivian boa, 1.0 Nuevo Leon kingsnake, 1.0 Mountain Garter snake
Ridge Runner_20 is offline  
Login to remove ads
Old 12-10-12, 09:18 PM   #2
Corey209
Member
 
Corey209's Avatar
 
Join Date: Nov-2012
Posts: 1,042
Country:
Send a message via Skype™ to Corey209
Re: Mites

Quote:
Originally Posted by Ridge Runner_20 View Post
Look for 0.5% permethrin. It's the same active ingredient and concentration found in Provent-A-Mite. However, be careful to NEVER, EVER spray it directly on your snake!

From a local and respected breeder: Remove everything from the cage, bedding included, and fog the enclosure with a light mist of your chosen 0.5% permethrin product (Provent-A-Mite, Nix, RID, Equate, etc.). Allow product to dissipate for a few hours, then put fresh bedding and bleached/baked hides, branches, etc. back into enclosure along with snake. It is also recommended to wait another 4-6 hours before introducing a water source.

Hope this helps. Good luck getting rid of the little buggers.

RR_20 (Mike)
I haven't found anymore mites so far, but I'm afraid they might be in the substrate of my gecko's terrarium. I'm probably going to spray it down tomorrow just to be safe. I was told though that it's fine to spray your snake and even on that post the guy does it. What would you recommend to get mites off of the snake with?
Corey209 is offline  
Old 12-10-12, 10:44 PM   #3
Aaron_S
Forum Moderator
 
Aaron_S's Avatar
 
Join Date: Nov-2002
Location: Toronto
Age: 41
Posts: 16,978
Send a message via MSN to Aaron_S
Re: Mites

Quote:
Originally Posted by Ridge Runner_20 View Post
Look for 0.5% permethrin. It's the same active ingredient and concentration found in Provent-A-Mite. However, be careful to NEVER, EVER spray it directly on your snake!

From a local and respected breeder: Remove everything from the cage, bedding included, and fog the enclosure with a light mist of your chosen 0.5% permethrin product (Provent-A-Mite, Nix, RID, Equate, etc.). Allow product to dissipate for a few hours, then put fresh bedding and bleached/baked hides, branches, etc. back into enclosure along with snake. It is also recommended to wait another 4-6 hours before introducing a water source.

Hope this helps. Good luck getting rid of the little buggers.

RR_20 (Mike)
What? I dilute my Nix with water and spray everything. Bedding and snake included. I don't mist anything. It makes ZERO sense to bake/bleach everything and then use nix purely on just an enclosure. Nix will kill everything on all substrate/branches/hides/rocks...

Once done spraying. Place water bowl into enclosure. Fin.
Aaron_S is offline  
Old 12-10-12, 11:39 PM   #4
Ridge Runner_20
Member
 
Ridge Runner_20's Avatar
 
Join Date: Dec-2011
Location: Elk Grove, CA
Age: 60
Posts: 150
Country:
Re: Mites

Quote:
Originally Posted by Aaron_S View Post
What? I dilute my Nix with water and spray everything. Bedding and snake included. I don't mist anything. It makes ZERO sense to bake/bleach everything and then use nix purely on just an enclosure. Nix will kill everything on all substrate/branches/hides/rocks...

Once done spraying. Place water bowl into enclosure. Fin.
I'm talking specifically about the bedding spray in aerosol form. That can be toxic in liquid form, and needs to dry completely before adding bedding, hides, water, etc. The dried spray will leave a thin film in the enclosure which will continue to kill any hiding mites or unhatched eggs for a period of time after initial treatment. Read the instructions for using Provent-A-Mite (again, same 0.5% permethrin as lice bedding sprays), and as stated, DO NOT treat the snake directly. Makes perfect sense to me.

RR_20 (Mike)
__________________
0.1 Hog Island boa, 0.1 Bolivian boa, 1.0 Nuevo Leon kingsnake, 1.0 Mountain Garter snake
Ridge Runner_20 is offline  
Old 12-10-12, 11:52 PM   #5
Corey209
Member
 
Corey209's Avatar
 
Join Date: Nov-2012
Posts: 1,042
Country:
Send a message via Skype™ to Corey209
Re: Mites

Quote:
Originally Posted by Ridge Runner_20 View Post
I'm talking specifically about the bedding spray in aerosol form. That can be toxic in liquid form, and needs to dry completely before adding bedding, hides, water, etc. The dried spray will leave a thin film in the enclosure which will continue to kill any hiding mites or unhatched eggs for a period of time after initial treatment. Read the instructions for using Provent-A-Mite (again, same 0.5% permethrin as lice bedding sprays), and as stated, DO NOT treat the snake directly. Makes perfect sense to me.

RR_20 (Mike)
I treated my king snake directly and he's not acting any different nor has any complications arisen. The place I go to even told me it'd be fine if I avoided the head.
Corey209 is offline  
Login to remove ads
Old 12-11-12, 01:10 PM   #6
shaunyboy
slainte mhath
 
shaunyboy's Avatar
 
Join Date: Nov-2009
Location: kelty,fife
Age: 60
Posts: 8,509
Country:
Re: Mites

Quote:
Originally Posted by Corey209 View Post
I treated my king snake directly and he's not acting any different nor has any complications arisen. The place I go to even told me it'd be fine if I avoided the head.
if your talking about provent a mite...

read the can...its NOT intended for direct use on a snake...!!

do NOT spray it directly on the snake...

you run the risk of your snake showing neurological issues,even death,imo just because you got away with it once,does not mean it won't affect the longevity of the snake

provent a mite is the ONLY product i use...

no need to spray chemicals directly on snake

its designed for reptiles

remains active for 30 days,so is great for quarantine tanks for new arrivals

also theres NO need for repeat treatments,like most other mite methods require

re mites
The Life History of Snake Mites | Vida Preciosa International, Inc.

cheers shaun
__________________
ALWAYS judge a person by the way they treat someone who can be of NO POSSIBLE USE TO THEM !
shaunyboy is offline  
Old 12-11-12, 08:38 PM   #7
Corey209
Member
 
Corey209's Avatar
 
Join Date: Nov-2012
Posts: 1,042
Country:
Send a message via Skype™ to Corey209
Re: Mites

Quote:
Originally Posted by shaunyboy View Post
if your talking about provent a mite...

read the can...its NOT intended for direct use on a snake...!!

do NOT spray it directly on the snake...

you run the risk of your snake showing neurological issues,even death,imo just because you got away with it once,does not mean it won't affect the longevity of the snake

provent a mite is the ONLY product i use...

no need to spray chemicals directly on snake

its designed for reptiles

remains active for 30 days,so is great for quarantine tanks for new arrivals

also theres NO need for repeat treatments,like most other mite methods require

re mites
The Life History of Snake Mites | Vida Preciosa International, Inc.

cheers shaun
Talking about permethrin or nix.
Corey209 is offline  
Old 12-11-12, 12:03 AM   #8
Aaron_S
Forum Moderator
 
Aaron_S's Avatar
 
Join Date: Nov-2002
Location: Toronto
Age: 41
Posts: 16,978
Send a message via MSN to Aaron_S
Re: Mites

Quote:
Originally Posted by Ridge Runner_20 View Post
I'm talking specifically about the bedding spray in aerosol form. That can be toxic in liquid form, and needs to dry completely before adding bedding, hides, water, etc. The dried spray will leave a thin film in the enclosure which will continue to kill any hiding mites or unhatched eggs for a period of time after initial treatment. Read the instructions for using Provent-A-Mite (again, same 0.5% permethrin as lice bedding sprays), and as stated, DO NOT treat the snake directly. Makes perfect sense to me.

RR_20 (Mike)
I don't use PAM. It tends to be worse with it's aerosol.

I prefer the wet spray of water/Nix. All is well with the snakes I Nix.

Every new snake gets Nixed. I know breeders who Nix before and after vending a show. It's fine.
Aaron_S is offline  
Old 12-11-12, 12:13 AM   #9
Corey209
Member
 
Corey209's Avatar
 
Join Date: Nov-2012
Posts: 1,042
Country:
Send a message via Skype™ to Corey209
Re: Mites

Quote:
Originally Posted by Aaron_S View Post
I don't use PAM. It tends to be worse with it's aerosol.

I prefer the wet spray of water/Nix. All is well with the snakes I Nix.

Every new snake gets Nixed. I know breeders who Nix before and after vending a show. It's fine.
That's what the shop I go to does as well and they go to all the conventions in California without having any infestations in their shop.
Corey209 is offline  
Old 12-11-12, 10:02 AM   #10
millertime89
Forum Moderator
 
Join Date: Sep-2011
Location: Overhill and underhill.
Posts: 7,365
Country:
Re: Mites

Quote:
Originally Posted by Aaron_S View Post
I don't use PAM. It tends to be worse with it's aerosol.

I prefer the wet spray of water/Nix. All is well with the snakes I Nix.

Every new snake gets Nixed. I know breeders who Nix before and after vending a show. It's fine.
Think I might've asked you this before, what's your mix ratio for nix?
__________________
https://www.facebook.com/KyleMillerPhotography1 & https://www.facebook.com/KylesQualityConstrictors
"We all have a common enemy and I can assure you it's nobody in this hobby." - Brian Barczyk
millertime89 is offline  
Login to remove ads
Old 12-16-12, 09:04 AM   #11
Aaron_S
Forum Moderator
 
Aaron_S's Avatar
 
Join Date: Nov-2002
Location: Toronto
Age: 41
Posts: 16,978
Send a message via MSN to Aaron_S
Re: Mites

Quote:
Originally Posted by millertime89 View Post
Think I might've asked you this before, what's your mix ratio for nix?
1 tablespoon to 1 litre.
Aaron_S is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:45 PM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right