You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
Thanks GunGirl! What the dimensions of your viv? I don't know much about GTPs but do you handle yours? If not, even when opening the cage to change water, mist, or clean, don't the temperatures in the viv change from the different temps (inside the viv vs. outside of it?
Thanks GunGirl! What the dimensions of your viv? I don't know much about GTPs but do you handle yours? If not, even when opening the cage to change water, mist, or clean, don't the temperatures in the viv change from the different temps (inside the viv vs. outside of it?
The viv is 3ft tall 2ft deep and 3 ft wide. I do not handle him at all he is 100% a display snake. If you want to handle a snake a GTP is NOT for you. When spot cleaning or changing water yes the temp will drop a tiny bit but I don't leave the door open for more than a minute or two so it's not a huge deal. I also built his cage with that in mind. He has 2 doors a large upper door and a small door on the bottom. For cleaning and water changes I only open the small bottom door. This allows 98% of the heat to stay inside the cage. Once the temp starts to drop his RHP kicks on and is replacing it as fast as it leaves the cage.