border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 12-14-11, 01:24 PM   #1
Mose
Member
 
Mose's Avatar
 
Join Date: Dec-2011
Location: Lincoln
Posts: 33
Country:
Re: Modifying my 20g tank to have front sliding doors

Sliding doors will be way easier than hinged doors. I made door track out of pieces of wood a while back, and it was not very durable. I used a router table, and even then it was hard to make them straight, so I wouldn't even dream of trying it with a Dremel. You can get 6' of 1/4" or 1/8" plastic door track for under $10. It's waterproof, durable, and 10 times better than what I made myself. Below are a couple of cages I made myself using this track and 0.100" plexiglass. The doors are self locking, so they don't need an external lock.

Cage made out of Melamine.


This cage was made out of 2 Itso cubes from Target welded together.


In principle, these cages aren't really different from turning an aquarium on its side. If I were you, I'd attach the track with silicone, and it would probably work just fine.
Mose is offline  
Login to remove ads
Old 12-15-11, 10:32 PM   #2
DeesBalls
Formerly Lil_Boa
 
DeesBalls's Avatar
 
Join Date: Oct-2008
Location: Bellevue OHIO
Posts: 2,835
Country:
Re: Modifying my 20g tank to have front sliding doors

Quote:
Originally Posted by Mose View Post
Sliding doors will be way easier than hinged doors. I made door track out of pieces of wood a while back, and it was not very durable. I used a router table, and even then it was hard to make them straight, so I wouldn't even dream of trying it with a Dremel. You can get 6' of 1/4" or 1/8" plastic door track for under $10. It's waterproof, durable, and 10 times better than what I made myself. Below are a couple of cages I made myself using this track and 0.100" plexiglass. The doors are self locking, so they don't need an external lock.

Cage made out of Melamine.


This cage was made out of 2 Itso cubes from Target welded together.


In principle, these cages aren't really different from turning an aquarium on its side. If I were you, I'd attach the track with silicone, and it would probably work just fine.
where do you get your door tracks at?!!??! i looked all over and could not find any... any where, i had to use metal tracks... they work, just not really nice...
__________________
http://www.facebook.com/DeesBalls Stop by and check out my page! pics daily, and eventually will have sales!
DeesBalls is offline  
Old 12-16-11, 02:27 PM   #3
Mose
Member
 
Mose's Avatar
 
Join Date: Dec-2011
Location: Lincoln
Posts: 33
Country:
Re: Modifying my 20g tank to have front sliding doors

That turned out nice! Good job on the door.

Quote:
Originally Posted by LiL_Boa View Post
where do you get your door tracks at?!!??! i looked all over and could not find any... any where, i had to use metal tracks... they work, just not really nice...
None of the big stores like Home Depot have it. There is a small hardware store in my town that stocks it, so it's easy for me. Any hardware store that is affiliated with Do It Best can get it for you. The closest store I could find for you is in Port Clinton. Go to this link, and type in "door track" in the product search window. bassetts.doitbest.com - Bassett's Do it Best Hardware - Port Clinton's Locally Owned Hardware Store and Home Improvement Center
They have 1/4" plastic track, so I'm sure they could order some 1/8" for you. There are places to order it online, but shipping is really expensive.
Mose is offline  
Old 12-21-11, 12:11 AM   #4
DeesBalls
Formerly Lil_Boa
 
DeesBalls's Avatar
 
Join Date: Oct-2008
Location: Bellevue OHIO
Posts: 2,835
Country:
Re: Modifying my 20g tank to have front sliding doors

Quote:
Originally Posted by Mose View Post
That turned out nice! Good job on the door.



None of the big stores like Home Depot have it. There is a small hardware store in my town that stocks it, so it's easy for me. Any hardware store that is affiliated with Do It Best can get it for you. The closest store I could find for you is in Port Clinton. Go to this link, and type in "door track" in the product search window. bassetts.doitbest.com - Bassett's Do it Best Hardware - Port Clinton's Locally Owned Hardware Store and Home Improvement Center
They have 1/4" plastic track, so I'm sure they could order some 1/8" for you. There are places to order it online, but shipping is really expensive.
omg, Port Clinton is close ... maybe only 30 min. i will for sure drive there and see, i will call 1st though... any ways how did you get them to attach, doesnt look like there is a place for screws/nails?
__________________
http://www.facebook.com/DeesBalls Stop by and check out my page! pics daily, and eventually will have sales!
DeesBalls is offline  
Old 12-22-11, 08:10 AM   #5
Mose
Member
 
Mose's Avatar
 
Join Date: Dec-2011
Location: Lincoln
Posts: 33
Country:
Re: Modifying my 20g tank to have front sliding doors

Quote:
Originally Posted by LiL_Boa View Post
omg, Port Clinton is close ... maybe only 30 min. i will for sure drive there and see, i will call 1st though... any ways how did you get them to attach, doesnt look like there is a place for screws/nails?
Yeah, call first to make sure it's in stock.
I've used several different adhesives for different projects (aquarium silicone, Gorilla Glue, and fiberglass resin), and they all work. For attaching it to a glass aquarium, the best option would probably be aquarium silicone, for obvious reasons.
Mose is offline  
Login to remove ads
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:51 PM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right