border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Community Forums > General Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 04-25-18, 03:36 PM   #1
phenyx
Member
 
Join Date: Feb-2018
Posts: 218
Country:
Re: I think I'm done.

And I still don't know where to put a thermostat probe and where to measure the temperature of the hot spot with my IR temp gun.

My BRB needs a hot spot around 86-88 degrees. Is that measured on the surface of the substrate? On the glass below the substrate? Oh, but I'm only supposed to have 1/4" of substrate over the hotspot according to Craig Frechette, but according to someone else I'm supposed to have substrate deep enough that Jerkface can burrow if he wants to. Can't burrow in 1/4", but I can only have 1/4" substrate over the hotspot but Jerkface frequently burrows so it needs to be deeper, but it can't be deeper and on and on and on and on. Not to mention that I'm making all these changes and trying to fix my hot spot temperature in the enclosure of a snake that regurged last Friday and is probably getting even more stressed out by my fumbling around, but if I'd left it the way it was he'd have gotten even sicker and continued to regurge so you have to change it NOW, but don't stress out your snake even more, but change out your thermostat NOW because you have BAD HUSBANDRY.

I still don't know if I'm feeding my snakes correctly. Is 12% of body weight every 7 days all good and proper for all constricters like BallBuster says or is it Power Feeding that will lead to obesity like Big Snake Girl says? No bulge, moderate bulge, same size as girth, 1.5x girth, move up a prey size when there's no longer a bulge, there should never be a visible bulge after feeding...WTactualF? All I want to know is how often and what to feed my Ball Python. I've been here 3 months and I still don't know. At this point all I can assume is that I'm doing it wrong and Nagini will either starve or be obese.

All I've learned here is that everything I do is wrong according to someone.
phenyx is offline  
Login to remove ads
Old 05-03-18, 02:54 AM   #2
VeedubDan
Member
 
VeedubDan's Avatar
 
Join Date: Apr-2018
Location: Stockton-On-Tees
Age: 38
Posts: 44
Country:
Smile Re: I think I'm done.

Quote:
Originally Posted by phenyx View Post
All I've learned here is that everything I do is wrong according to someone.
It always will be Phenyx! Everyone thinks they know best because of what works for them. Me, personally, I don't even care about temps that much. I set my thermostat to 90 and let them crack on. My milk snake thermostat is set to 80 and ive never fiddled with it, moved it, changed temp or substrate thickness. He's been in his vivarium for 6 years now. he currently eats 2 large adult mice every 2 weeks, which I'm about to change to 3 weeks because hes looking a bit plump!

one thing I've noticed over the last 12 years of keeping snakes is that everyone with a snake thinks they're an expert. I took all my advice from a local breeder and i still turn to him for advice today. He always said to me set your temps and humidity and leave them the f**k alone! messing around trying to get that perfect hot spot will stress out the snake and cause all sort of problems.

Do you think they have perfect hot spot temps every day in the wild?

Do you think they have the perfect sized prey item every feed in the wild?

What about when it rains and they get soaked? or it doesn't rain and they're dry for a few days?

If they really needed so much interference from ourselves, they would be extinct by now!

Oh and just to put my personal opinion out there. If you're using a heat mat inside the tank, tape the probe directly to the mat. If the mat is outside the tank, sandwich it between the glass and the mat (if possible). If you're using a heat lamp, tape the probe to the side of the tank about half way between the lamp and the substrate. (only use aluminium duct tape)
That's how i have mine and i don't have any problems. They all thermoregulate totally fine and eat and shed and poop!

Set your temps, regulate your humidity and leave them alone!

And please, stop worrying!
__________________
1.0 Nelsons Albino Milk snake | 1.0.1 BCI | 1.0 Jack Russell | 0.1 Staffy x Collie | 1.2.1 Homo sapiens |
VeedubDan is offline  
Old 05-03-18, 05:04 PM   #3
bigsnakegirl785
Member
 
bigsnakegirl785's Avatar
 
Join Date: Aug-2011
Location: Waynesville
Age: 32
Posts: 3,879
Country:
Re: I think I'm done.

Quote:
Originally Posted by VeedubDan View Post
It always will be Phenyx! Everyone thinks they know best because of what works for them. Me, personally, I don't even care about temps that much. I set my thermostat to 90 and let them crack on. My milk snake thermostat is set to 80 and ive never fiddled with it, moved it, changed temp or substrate thickness. He's been in his vivarium for 6 years now. he currently eats 2 large adult mice every 2 weeks, which I'm about to change to 3 weeks because hes looking a bit plump!

one thing I've noticed over the last 12 years of keeping snakes is that everyone with a snake thinks they're an expert. I took all my advice from a local breeder and i still turn to him for advice today. He always said to me set your temps and humidity and leave them the f**k alone! messing around trying to get that perfect hot spot will stress out the snake and cause all sort of problems.

Do you think they have perfect hot spot temps every day in the wild?

Do you think they have the perfect sized prey item every feed in the wild?

What about when it rains and they get soaked? or it doesn't rain and they're dry for a few days?

If they really needed so much interference from ourselves, they would be extinct by now!

Oh and just to put my personal opinion out there. If you're using a heat mat inside the tank, tape the probe directly to the mat. If the mat is outside the tank, sandwich it between the glass and the mat (if possible). If you're using a heat lamp, tape the probe to the side of the tank about half way between the lamp and the substrate. (only use aluminium duct tape)
That's how i have mine and i don't have any problems. They all thermoregulate totally fine and eat and shed and poop!

Set your temps, regulate your humidity and leave them alone!

And please, stop worrying!
I could see your other points but temperature is incredibly important. Too hot of temps can burn them, overheat them, cause neurological damage, even death...you should really be paying attention to it. Things go well until they don't, and monitoring the heat won't 100% guarantee nothing will happen but greatly reduce it. If you have thermostats (which it sounds like you do), that's great, but they break down sometimes so you should check at minimum once a week, but preferably every other day or so.

This is especially true for BRBs. They are not like your milksnakes, they do not survive high temps.
__________________
3.3 BI Cloud, sunglow Nymeria, ghost Tirel, anery motley Crona, ghost Howl, jungle Dominika - 0.1 retic Riverrun - RIP (Guin, Morzan, Sanji, and Homura - BRBs, Bud - bp, Draco and Demigod - garters)
bigsnakegirl785 is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:21 AM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right