|
|  |
| Notices |
Welcome to the sSnakeSs community. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
|
02-12-18, 02:00 PM
|
#1
|
|
Member
Join Date: Sep-2012
Posts: 329
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
The size of your proposed enclosure sounds great, a large Burmese python would certainly appreciate the room to move in. I don’t want to talk you out of it, but you have to consider several issues with an enclosure of that size.
We are talking about a room sized enclosure, let’s call it a room. In order to clean it you have to walk into the enclosure / room, so don’t reduce the height to 150 cm / 5 ft, use the full height of the room you build it in so you can stand in it.
If you enter the enclosure, you will come near your snake(s), not only with a hand or some tools but with your full body and avoiding a bite might proof more difficult that way. I have no experience with large pythons, someone like Tsubaki is much better suited to tell you this, but I saw several large Burmese pythons which were really nasty. I don’t doubt that there are calm snakes out there as well, it will come down to the individual snake, but you have to plan for the worst case and need somebody at home whenever you work with a large snake.
Have you considered the amount of energy you will need to light and heat so much room? Especially during a Finish winter?
__________________
1,0 Lampropeltis triangulum campbelli, 1,2 Gonyosoma oxycephalum, 1,2 Philodryas baroni, 1,2 Spilotes pullatus, 2,1 Spilotes sulphureus, 0,1 Gonyosoma boulengeri, 1,1 Zamenis longissimus, 0,1 Malpolon sp., 1,1 Malpolon monspessulanus
|
|
|
02-12-18, 02:45 PM
|
#2
|
|
Member
Join Date: Feb-2018
Posts: 6
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
Quote:
Originally Posted by Roman
We are talking about a room sized enclosure, let’s call it a room. In order to clean it you have to walk into the enclosure / room, so don’t reduce the height to 150 cm / 5 ft, use the full height of the room you build it in so you can stand in it.
|
But if I have a 150cm tall enclosure, then I can stack two on top of each other having a cage for two burmese pythons in the same floor space one requires. Basically because a female is larger, have the bottom cage be for the female, then the above cage for the male.
|
|
|
02-12-18, 02:54 PM
|
#3
|
|
Member
Join Date: Sep-2012
Posts: 329
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
I suppose you are missing my point. If you build it as you propose it’s dimensions would be about 430 x 210 150 cm (14 x 7 x 5 ft). How do you want to reach the back of your enclosure if it is 200 cm deep (wide)? Especially if there is another enclosure of the same size on top where you would probably have to step on a small ladder to reach in. I have a large enclosure for my Spilotes pullatus which is 250 x 90 x 190 cm (ca 8 x 3 x 6 ft), and even a three feed deep enclosure can be difficult to do maintenance in.
__________________
1,0 Lampropeltis triangulum campbelli, 1,2 Gonyosoma oxycephalum, 1,2 Philodryas baroni, 1,2 Spilotes pullatus, 2,1 Spilotes sulphureus, 0,1 Gonyosoma boulengeri, 1,1 Zamenis longissimus, 0,1 Malpolon sp., 1,1 Malpolon monspessulanus
|
|
|
02-12-18, 03:01 PM
|
#4
|
|
Member
Join Date: Feb-2018
Posts: 6
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
Quote:
Originally Posted by Roman
How do you want to reach the back of your enclosure if it is 200 cm deep (wide)? Especially if there is another enclosure of the same size on top where you would probably have to step on a small ladder to reach in. I have a large enclosure for my Spilotes pullatus which is 250 x 90 x 190 cm (ca 8 x 3 x 6 ft), and even a three feed deep enclosure can be difficult to do maintenance in.
|
I would buy cleaning apparatus with a telescope handle in order to reach the entire two meters of the width of the enclosure. And I would install a divider slot into the enclosure for cleaning it. So I would move the snake to the other side of the enclosure, then slide a divider panel to the divider slot and push it all the way back to the wall when I clean out the other half of the enclosure then do the repeat for the other half.
|
|
|
02-12-18, 03:43 PM
|
#5
|
|
Member
Join Date: Sep-2012
Posts: 329
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
Quote:
Originally Posted by Tyzuris
I would buy cleaning apparatus with a telescope handle in order to reach the entire two meters of the width of the enclosure. And I would install a divider slot into the enclosure for cleaning it. So I would move the snake to the other side of the enclosure, then slide a divider panel to the divider slot and push it all the way back to the wall when I clean out the other half of the enclosure then do the repeat for the other half.
|
Sounds good in theory, but believe me it won’t work in praxis. To work with a tool this long you would need about the same room behind you, otherwise you would bump into the wall behind you. Balancing the amounts of feces a large snake can and will produce will result in scattering most of it all over the place. There will an obstacle like branches, hiding box, water bowl etc. in your way whenever you try to reach the back end of your enclosure.
The divider is a nice touch, but most likely your snake won’t cooperate, it will of course be at the dirty side and will stay there, especially if you are in a hurry. And of course the points IDvsEGO raised, don’t underestimate the weight of an enclosure of this size.
__________________
1,0 Lampropeltis triangulum campbelli, 1,2 Gonyosoma oxycephalum, 1,2 Philodryas baroni, 1,2 Spilotes pullatus, 2,1 Spilotes sulphureus, 0,1 Gonyosoma boulengeri, 1,1 Zamenis longissimus, 0,1 Malpolon sp., 1,1 Malpolon monspessulanus
|
|
|
02-12-18, 04:02 PM
|
#6
|
|
Member
Join Date: Feb-2018
Posts: 6
Country:
|
Re: Opinion on this rule of thumb for the size of a snake enclosure?
Quote:
Originally Posted by Roman
Sounds good in theory, but believe me it won’t work in praxis. To work with a tool this long you would need about the same room behind you, otherwise you would bump into the wall behind you. Balancing the amounts of feces a large snake can and will produce will result in scattering most of it all over the place. There will an obstacle like branches, hiding box, water bowl etc. in your way whenever you try to reach the back end of your enclosure.
The divider is a nice touch, but most likely your snake won’t cooperate, it will of course be at the dirty side and will stay there, especially if you are in a hurry. And of course the points IDvsEGO raised, don’t underestimate the weight of an enclosure of this size.
|
Alright. Thanks for bringing some insightful feedback on my idea here. I appreciate it.
|
|
|
| Thread Tools |
|
|
| Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:18 PM.
Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.
|
 |