|
Re: T8 for Dumeril Boa UTH or RHP
Quote:
Originally Posted by GyGbeetle
Just got an email from Reptile Basics, asking about ambient temps, and this was their response:
Hi,
The rule of thumb for selecting the proper size is similar to that of choosing a heating pad or heat tape. You should cover ¼ to 1/3 of one end of the cage. The difference is that an RHP has an “effective range” of about 18”. This means that taller enclosures for animals that do not climb in a tall enclosure, you may need to lower the mounting height by installing a shelf and mounting the panel on the bottom of the shelf.
RHP’s create a great basking area, but do not do raise the ambient temperature a great deal.* This means to regulate the panel temperature, the thermostat probe must be mounted directly below the panel at a distance of about 3”.
(*A piece of slate or similar material directly below the panel can be warmed and in turn warm the enclosure somewhat.)
|
I understand AP are a respected manufacturer but I absolutely disagree with what they say about rhp's unless they mean some thing completely different to what I understand by rhp.
An rhp is just another form of che essentially and they are very effective at raising ambient temperature as they heat the ground and this radiates the heat back up to the air.
I also disagree with their probe placement but as I say what we call an rhp in the UK may be different.
__________________
0.1 B imperator, 1.0 M spilota harrisoni, 1.0 C hortulanus, 2.1 P reticulatus (Madu locality), 1.1 S amethystine, 1.1 L olivaceous, 1.0 C angulifer, 1.0 Z persicus, 0.1 P regius, 0.1 N natrix, 0.1 E climacophora, 1.0 P obsoletus, 0.1 L geluta nigrtia, 1.0 P catenifer sayi, 1.0 T lepidus
|