border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Python Forums > Morelia Spilota

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-12-13, 10:07 AM   #2
pdomensis
Member
 
pdomensis's Avatar
 
Join Date: Dec-2012
Location: Idaho
Posts: 762
Country:
Re: Making a good Carpet/Bredli enclosure?

1. The glass is an easy fix. Any glass shop or even Lowes/Home depot will custom cut glass or acrylic. If you can't router an edge for the glass to sit in, you could either glue it straight on the wood like it was previously (silicone caulk works well), or get some cheap framing material or wood trim so the glass sits in place.

2. Once the glass is fixed, I would put in substrate, water dish and a hygrometer to see what your humidity is. Then start messing with ventilation. I like holes on both sides and the back; I think it helps the air flow. You can slowly add more holes until you get somewhere close to the proper RH.

3. like you said, UV isn't necessary but does look nice. Ceiling mounted tubes are easy to install; you'll just have to drill a hole for the cord and putty it up so the snake can't get out.

4. It would be hard for any carpet to fill up that sized cage, but I love my bredli and would recommend them to anyone.

additional ideas: I would really clean that sucker before introducing a new snake. If it were me I would probably sand, stain and reseal the whole thing.

Good luck!
pdomensis is offline  
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:58 PM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right