border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Boa Forums > General Boa Forum

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-02-17, 02:59 PM   #6
TRD
Member
 
Join Date: Dec-2016
Posts: 715
Country:
Re: New snake parent: help needed

If humidity is a problem, you can raise it by using the right bedding (as already stated). If even then it's still a problem (ie- you need to keep the bedding too wet to keep humidity up) you can create a layer of clay balls in the bottom, a separation on top of that (f.e. mosquito protection net), and your soil layer on top of that so that the soil won't mix with the clay balls. In 1 corner you can instead of soil put gravel so that you can poor water directly to the clayball layer. Basically you make the terrarium wet from the bottom up. This will release moist into the air consistently without causing your soil to be soaking wet. You'll have to poke some holes/stir the soil slightly about every week because the snake will lay on it and this may cause the air reaching down into the soil to be blocked. Healthy bacteria require oxygen... if oxygen is unavailable, unhealthy bacteria will start to grow and that is bad for the snake's health and stinky for you. Restricting airflow is not healthy in high humidity environments, and if possible should be avoided. If there is really no way around it and you have to restrict airflow, the terrarium should be opened a few times a day so that fresh air can find it's way in.

PS. This would also allow you to put live plants in there, if you like. But that may cause some extra work in maintenance.

You can't use UTH with this setup though.

PS. Don't spray the substrate to keep humidity up, spray the sides of the terrarium on the inside. This will already avoid a lot of problems.
TRD is offline  
 

Tags
humidity


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:36 AM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right