Quote:
Originally Posted by dannybgoode
Didn't realise a T8 was only 12" high-40W may suffice in that case. I'd still over spec in any event and use a thermostat so the heater isn't running at near full power all the time-I'd rather have a bit of headroom and have the heater ticking over.
As rhp's raise the ambient temperature quite effectively the inside of the cave will warm nicely...
|
Just got an email from Reptile Basics, asking about ambient temps, and this was their response:
Hi,
The rule of thumb for selecting the proper size is similar to that of choosing a heating pad or heat tape. You should cover ¼ to 1/3 of one end of the cage. The difference is that an RHP has an “effective range” of about 18”. This means that taller enclosures for animals that do not climb in a tall enclosure, you may need to lower the mounting height by installing a shelf and mounting the panel on the bottom of the shelf.
RHP’s create a great basking area,
but do not do raise the ambient temperature a great deal.* This means to regulate the panel temperature, the thermostat probe must be mounted directly below the panel at a distance of about 3”.
(*A piece of slate or similar material directly below the panel can be warmed and in turn warm the enclosure somewhat.)