|
Re: Making a good Carpet/Bredli enclosure?
1. The glass is an easy fix. Any glass shop or even Lowes/Home depot will custom cut glass or acrylic. If you can't router an edge for the glass to sit in, you could either glue it straight on the wood like it was previously (silicone caulk works well), or get some cheap framing material or wood trim so the glass sits in place.
2. Once the glass is fixed, I would put in substrate, water dish and a hygrometer to see what your humidity is. Then start messing with ventilation. I like holes on both sides and the back; I think it helps the air flow. You can slowly add more holes until you get somewhere close to the proper RH.
3. like you said, UV isn't necessary but does look nice. Ceiling mounted tubes are easy to install; you'll just have to drill a hole for the cord and putty it up so the snake can't get out.
4. It would be hard for any carpet to fill up that sized cage, but I love my bredli and would recommend them to anyone.
additional ideas: I would really clean that sucker before introducing a new snake. If it were me I would probably sand, stain and reseal the whole thing.
Good luck!
|