Quote:
Originally Posted by Gungirl
One thing I want to let you know is.. when using a radiant heat panel the top of the viv will get warm. Not hot but warm. If you are using a radiant heat panel in the bottom viv check the floor of the viv right above it. Just monitor your temps. If you have the hot sides for both snakes on the same side you might be able to keep the top RHP at a lower temp due to the added heat from the bottom one. I have a 1/2" air gap between mine so that is not an issue for me.
|
I use ceramic heat emitters and have a similar setup, three vivs on top of each other with no gaps.
Put the snake needing the lowest temps at the bottom and keep all the CHE's above each other for the other vivs. Make sure the thermostat probes are all placed in line also.
My "middle" viv takes a lot les heating than the bottom or top one
__________________
May you have more good days than bad

You never know how strong you are - until being strong is your only choice
There are no dark clouds - just well hidden silver linings!!