border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 12-17-12, 02:34 PM   #1
September
Member
 
Join Date: Nov-2012
Location: Alabama
Age: 31
Posts: 39
Country:
BP enclosure

I'm trying to draw up a set of plans for a DIY BP viv, and I was wondering if I could get some help with the dimensions?
September is offline  
Login to remove ads
Old 12-17-12, 03:46 PM   #2
Lankyrob
Non Carborundum Illegitimi
 
Lankyrob's Avatar
 
Join Date: Mar-2010
Location: Keynsham
Age: 51
Posts: 9,556
Country:
Re: BP enclosure

Prsonally i use 4ft by 2ft by 2ft for my BP.
__________________
May you have more good days than bad
You never know how strong you are - until being strong is your only choice
There are no dark clouds - just well hidden silver linings!!
Lankyrob is offline  
Old 12-17-12, 09:02 PM   #3
September
Member
 
Join Date: Nov-2012
Location: Alabama
Age: 31
Posts: 39
Country:
Re: BP enclosure

I designed this on sketch up, would it work?
September is offline  
Old 12-17-12, 09:23 PM   #4
Gungirl
Diesel the pumpkin killer
 
Gungirl's Avatar
 
Join Date: Mar-2011
Age: 43
Posts: 5,352
Country:
Re: BP enclosure

Yeah sure.. looks kind of like mine.




__________________
Kat
Gungirl is offline  
Old 12-17-12, 09:34 PM   #5
September
Member
 
Join Date: Nov-2012
Location: Alabama
Age: 31
Posts: 39
Country:
Re: BP enclosure

Oh cool! How do you heat/light yours?
September is offline  
Login to remove ads
Old 12-18-12, 04:57 AM   #6
Gungirl
Diesel the pumpkin killer
 
Gungirl's Avatar
 
Join Date: Mar-2011
Age: 43
Posts: 5,352
Country:
Re: BP enclosure

I use rope lighting just for the fun of it. I think I have turned it on once in the last 6 months. I heat with a radiant heat panel, that is what you see in the second picture.
__________________
Kat
Gungirl is offline  
Old 12-19-12, 03:37 AM   #7
flcracker2014
Member
 
Join Date: Dec-2012
Posts: 3
Country:
Re: BP enclosure

Would you use the same type of light/heating method for a set up something like this one?
Attached Images
File Type: jpg 4x2.jpg (25.1 KB, 33 views)
flcracker2014 is offline  
Old 12-19-12, 08:12 AM   #8
Gungirl
Diesel the pumpkin killer
 
Gungirl's Avatar
 
Join Date: Mar-2011
Age: 43
Posts: 5,352
Country:
Re: BP enclosure

I would use a Radiant heat panel in everything I could. So yes I would use them in that set up as well. The top photo I put up has another viv on top of it as well... so same idea.
__________________
Kat
Gungirl is offline  
Old 12-19-12, 03:11 PM   #9
flcracker2014
Member
 
Join Date: Dec-2012
Posts: 3
Country:
Re: BP enclosure

Cool, Thanks
flcracker2014 is offline  
Old 12-19-12, 04:47 PM   #10
Gungirl
Diesel the pumpkin killer
 
Gungirl's Avatar
 
Join Date: Mar-2011
Age: 43
Posts: 5,352
Country:
Re: BP enclosure

One thing I want to let you know is.. when using a radiant heat panel the top of the viv will get warm. Not hot but warm. If you are using a radiant heat panel in the bottom viv check the floor of the viv right above it. Just monitor your temps. If you have the hot sides for both snakes on the same side you might be able to keep the top RHP at a lower temp due to the added heat from the bottom one. I have a 1/2" air gap between mine so that is not an issue for me.
__________________
Kat
Gungirl is offline  
Login to remove ads
Old 12-19-12, 04:57 PM   #11
Lankyrob
Non Carborundum Illegitimi
 
Lankyrob's Avatar
 
Join Date: Mar-2010
Location: Keynsham
Age: 51
Posts: 9,556
Country:
Re: BP enclosure

Quote:
Originally Posted by Gungirl View Post
One thing I want to let you know is.. when using a radiant heat panel the top of the viv will get warm. Not hot but warm. If you are using a radiant heat panel in the bottom viv check the floor of the viv right above it. Just monitor your temps. If you have the hot sides for both snakes on the same side you might be able to keep the top RHP at a lower temp due to the added heat from the bottom one. I have a 1/2" air gap between mine so that is not an issue for me.
I use ceramic heat emitters and have a similar setup, three vivs on top of each other with no gaps.

Put the snake needing the lowest temps at the bottom and keep all the CHE's above each other for the other vivs. Make sure the thermostat probes are all placed in line also.

My "middle" viv takes a lot les heating than the bottom or top one
__________________
May you have more good days than bad
You never know how strong you are - until being strong is your only choice
There are no dark clouds - just well hidden silver linings!!
Lankyrob is offline  
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:07 AM.

Powered by vBulletin®
©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 2002-2026, Hobby Solutions.

right